CHONBURI
| Business Type | Manufacturer |
| Application | Industrial |
| Warranty | 1year |
| Out Put Capacity | One Ton/ Hour. |
| Click to view more | |
Preferred Buyer From
| Location | China |
Product Details
ViewMolecular sieve JLOX-300 is used in cryogenic air separation pre-purification unit.
JLOX-300 can fully exert and show its adsorption performance under low partial pressure.
-
Advantage
Under the condition of 2.7-2.8mmHg, compared with 13X molecular sieve, the adsorption capacity is increased by 53.6%. According to the reversible principle of molecular sieve adsorbent adsorption and desorption, the desorption efficiency of the purifier can be greatly improved, and the adsorption cycle (up to 7 hours) can be significantly extended. That is, the purifier can be made higher without changing the purifier device. The air handling capacity of the air purifier reduces the investment capital of the purifier and has higher economic benefits.
-
Storage
The product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air.
-
Regeneration
Molecular sieve JLOX-300 series can be regenerated by increasing temperature or reducing the pressure.
Technical Specification
| Item Type | Diameter | Static CO₂ Adsorption | Static CO₂ Adsorption | Bulk Density | Crush Strength | Package Moisture |
| JLOX-300 Bead | 1.6-2.5 | ≥6 | ≥6 | 0.68±0.03 | ≥25 | ≤1.5 |
| JLOX-305 Bead | 3—5 | ≥19.5 | ≥19.5 | 0.68±0.03 | ≥80 | ≤1.5 |
| Unit | mm | %wt | g/ml | N | %wt | |
| Note | 25℃，2.5mmHg | 25℃，250mmHg | Settled | Average | 575℃，1hr | |
Looking for "Air Separation JLOX-300" ?
Explore More Products
