Latest Products https://www.jalonzeolite.in Latest Products Sun, 17 Oct 2021 23:28:47 +0530 en-us https://www.jalonzeolite.in Molecular Sieve https://www.jalonzeolite.in/molecular-sieve.htm https://www.jalonzeolite.in/molecular-sieve.htm Sat, 24 Apr 2021 00:00:00 +0530 Molecular sieve is high performance adsorbent with excellent kinetic gas adsorption and separation capacity. Moleular sieve is widely used in various industries such as air separation, oxygen generator, hydrogen purification, natural gas dehydration, ethanol dehydration, ethylene dehydration, propylene dehydration, refrigerant dehydration, air break system etc. Zeolite Powder https://www.jalonzeolite.in/zeolite-powder.htm https://www.jalonzeolite.in/zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Synthetic zeolite powder is crystal aluminosilicates with defined three-dimensional pores of molecules size, such as water, Carbon Dioxide and Hydrogen Sulfide. Molecules smaller than pore diameter can be adsorbed while the larger ones are excluded. Thus zeolite powder is usually made into molecular sieve adsorbent to separate different molecules of different sizes. Type A and X are two typical structures of zeolite powder. Activated Zeolite Powder https://www.jalonzeolite.in/activated-zeolite-powder.htm https://www.jalonzeolite.in/activated-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Molecular sieve powder is activated zeolite powder. Activated molecular sieve powder has excellent moisture adsorption capacity. In polyurethane system, zinc-rich coating, painting, sealant and adhesive production and application, it works as moisture scavenger to remove water and other contaminant contained in solvents and additives to improve product quality and extend pot life. 3A Molecular Sieve https://www.jalonzeolite.in/3a-molecular-sieve.htm https://www.jalonzeolite.in/3a-molecular-sieve.htm Wed, 05 May 2021 00:00:00 +0530 Molecular sieve 3A, also called zeolite 3A or zeolith 3A, is one type of aluminosilicate crystal with average pores measuring of 3 angstrom (0.3 nm). Molecular with kinetic diameter larger than 3 angstrom will be adsorbed by zeolite 3A, otherwise be excluded.Zeolite 3A molecular sieves are typically used for agents drying or pull out moisture from products. Our 3A molecular sieves are usually used for ethanol dehydration, natual gas dehydration, cracked gas dehydration and refrigerant dehydration.   StorageAs an adsorbent, molecular sieve should not be left exposed to open air and should be stored in dry conditions with air-proof packaging. This product should not be exposed to temperatures exceeding 230˚C (450˚F).RegenerationMolecular sieve 3A can be regenerated or activated either thermal regeneration method(Thermal Swing Adsorption, TSA); To remove moisture from a 3A molecular sieve, a temperature of 200-230°C (390-570°F)is required. Molecular sieve 3A can also be regnerated or activated by lowering the pressure in the case of pressure swing processes (PSA). A properly regenerated or activated molecular sieve can give moisture dew points below -100°C. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process. 4A Molecular Sieve https://www.jalonzeolite.in/4a-molecular-sieve.htm https://www.jalonzeolite.in/4a-molecular-sieve.htm Sat, 24 Apr 2021 00:00:00 +0530 Molecular sieve 4A, also called zeolite 4A or zeolith 4A, is one type of aluminosilicate crystal with average pores measuring of 4 angstrom (0.4 nm). Molecular with kinetic diameter larger than 4 angstrom will be adsorbed by zeolite 4A, otherwise be excluded.Zeolite 4A molecular sieves are typically used for dehydration in air break system, natural gas drying.StorageThe product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air.RegenerationMolecular sieve 4A can be regenerated by increasing temperature or reducing the pressure. 5A Molecular Sieve https://www.jalonzeolite.in/5a-molecular-sieve.htm https://www.jalonzeolite.in/5a-molecular-sieve.htm Sat, 24 Apr 2021 00:00:00 +0530 Molecular sieve 5A, also called zeolite 5A or zeolith 5A, is one type of aluminosilicate crystal with average pores measuring of 5 angstrom (0.5 nm). Molecular with kinetic diameter larger than 5 angstrom will be adsorbed by zeolite 5A, otherwise be excluded.Zeolite 5A molecular sieves are typically used for normal- and iso-paraffins separation, removing water, carbon dioxide, hydrogen sulfide from sour natural gas, while decreasing COS formation.StorageThe product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air.RegenerationMolecular sieve 5A can be regenerated by increasing temperature or reducing the pressure. 13X Molecular Sieve https://www.jalonzeolite.in/13x-molecular-sieve.htm https://www.jalonzeolite.in/13x-molecular-sieve.htm Sat, 24 Apr 2021 00:00:00 +0530 Molecular sieve 13X, also called zeolite 13X or zeolith 13X, is one type of aluminosilicate crystal with average pores measuring of 9 angstrom (0.9 nm). Molecular with kinetic diameter larger than 9 angstrom will be adsorbed by zeolite 13X, otherwise be excluded.Zeolite 13X molecular sieves are typically used for removal of carbon dioxide and moisture from air, mercaptan and hydrogen sulphide from hydrocarbons such as LPG, butane, propane, etc.StorageThe product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air.RegenerationMolecular sieve 13X can be regenerated by increasing temperature or reducing the pressure. Molecular Sieve JLCOS https://www.jalonzeolite.in/molecular-sieve-jlcos.htm https://www.jalonzeolite.in/molecular-sieve-jlcos.htm Sat, 24 Apr 2021 00:00:00 +0530 Luoyang JALON JLCOS is a synthetic crystalline aluminosilicate with well-developed three-dimensional pore structure and strong polarity. Molecular sieve JLCOS adsorbent is specially designed copper ion based zeolite for purification of carbon monoxide gas in chemical synthesis industry due to its strong selectivity to carbon monoxide. It can also be used for purification of hydrogen, methane, nitrogen and other gases containing carbon monoxide impurities.   Technical Specifications   The synthesis of many important chemical products (such as acetic acid, oxalic acid, dimethylformamide, phosgene, etc.) requires high purity CO gas. At the same time, CO gas resources are very rich, but it is often combined with CH4, CO2, N2, H2. It coexists with water vapor and other gases, so it needs to be separated and purified before it can be used.       As a toxic and harmful gas, CO can poison the multidirectional catalysts in the synthesis industry and cause harm to people’s health and life. Therefore, it must be separated, purified, recycled and reused. Hydrogen Sieve JLPH5 https://www.jalonzeolite.in/hydrogen-sieve-jlph5.htm https://www.jalonzeolite.in/hydrogen-sieve-jlph5.htm Wed, 05 May 2021 00:00:00 +0530 Luoyang JALON JLPH5 is a synthetic crystalline aluminosilicate with well-developed three-dimensional pore structure and strong polarity with pore opening of 0.5nm. Molecular sieve JLPH5 is Binderless 5A specially designed for PSA hydrogen purifications. It can also used for separation of normal paraffins from branched and cyclic hydrocarbons, PSA oxygen generation. Storage The product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air. Regeneration Molecular sieve Binderless 5A JLPH5 can be regenerated by increasing temperature or reducing the pressure. Molecular Sieve JLVC-1 https://www.jalonzeolite.in/molecular-sieve-jlvc-1.htm https://www.jalonzeolite.in/molecular-sieve-jlvc-1.htm Sat, 24 Apr 2021 00:00:00 +0530 Zeolite JLVC-1 is our newest special molecular sieve that adsorbs volatile organic compounds (VOCs). JLVC-1 has excellent characteristics of hydrophobic and organic substances, and is suitable for the adsorption and separation of VOCs from industrial exhaust gas. Molecular sieve JLVC-1 has a developed three-dimensional medium microporous channel, which is suitable for adsorbing small and medium molecular VOCs with a molecular size less than 0.55nm, and is not suitable for adsorbing larger molecular VOCs. Typical VOCs suitable for JLVC-1 adsorption include: benzene, toluene, para-xylene, styrene, hexane, cyclohexane, acetone, ethyl acetate, methanol, ethanol, propanol, butanol, phenol, formaldehyde, and acetaldehyde, etc. Molecular Sieve NSP-4 https://www.jalonzeolite.in/molecular-sieve-nsp-4.htm https://www.jalonzeolite.in/molecular-sieve-nsp-4.htm Sat, 24 Apr 2021 00:00:00 +0530 The molecular sieve NSP-4, also called zeolite NSP-4 or zeolith NSP-4, is a velocity separation type adsorbent. It mainly utilizes its characteristic of faster adsorption of nitrogen than methane. The kinetic selectivity of nitrogen to methane is 405. Compared with the traditional velocity separation type carbon molecular sieve, NSP-4 adsorbent has the advantages of larger nitrogen adsorption capacity faster than nitrogen adsorption rate. It is more suitable for methane enrichment. Molecular Sieve JLRD-7 https://www.jalonzeolite.in/molecular-sieve-jlrd-7.htm https://www.jalonzeolite.in/molecular-sieve-jlrd-7.htm Sat, 24 Apr 2021 00:00:00 +0530 Made from aluminosilicate minerals, JLRD-7 molecular sieves are typically used as filtering agents to dehydrate or pull out moisture from AC system. With pores measuring 3 angstrom, molecules larger than it will not be adsorbed by the system. Our JLRD-7 Molecular sieves are usually used for drying system of the refrigerant R-134a in household and industrial refrigerators, freezers and air conditioners. It is also suitable for dehydration and drying of special refrigerants such as butane in refrigerators. Cax Molecular Sieve https://www.jalonzeolite.in/cax-molecular-sieve.htm https://www.jalonzeolite.in/cax-molecular-sieve.htm Wed, 05 May 2021 00:00:00 +0530 Molecular Sieve CaX is the calcium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than9 Angstrom (0.9nm) and exclude molecules of larger than 0.9nm. It is commonly used to remove N2O in cryogenic air separation PPU. Advantage Higher adsorption capacity, developed internally connected pore structure andsmaller crystal size make it have better dynamic and static adsorption performance;Relatively higher mechanical strength, to ensure a long service life;Lower package moisture content is beneficial to ensure higher adsorption activity;The product is general solid waste, safe and reliable. Storage The product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air. Regeneration CaX molecular sieve series can be regenerated by increasing temperature or reducing the pressure. Lithium Oxygen Sieve JLOX-100 https://www.jalonzeolite.in/lithium-oxygen-sieve-jlox-100.htm https://www.jalonzeolite.in/lithium-oxygen-sieve-jlox-100.htm Wed, 05 May 2021 00:00:00 +0530 Molecular sieve JLOX-100 series of high-efficiency oxygen generation molecular sieve is a lithium X-type aluminosilicate crystal, which is an oxygen generation molecular sieve with international advanced level. Widely used in: iron and steel, non-ferrous metallurgy, chemical industry, furnace energy-saving transformation, environmental protection, papermaking, aquaculture, medical care and other industries.Advantage The JLOX-100 series of high-efficiency oxygen molecular sieve is mainly used in pressure swing adsorption oxygen generation devices. It has the characteristics of large nitrogen adsorption capacity, high nitrogen and oxygen separation coefficient, and easy desorption. Its nitrogen adsorption capacity is 2-3 larger than A-type oxygen molecular sieve. The separation coefficient of nitrogen and oxygen is more than 2 times that of A-type oxygen molecular sieve. JLOX-101 is designed for PSA portable medical oxygen concentrator 1-5L/Min, JLOX-103 is designed for VPSA industrial oxygen generator, which oxygen flow rate is above 300Nm³/h,oxygen purity can up to 93%±3%. StorageThe product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air.RegenerationMolecular sieve JLOX-100 series can be regenerated by increasing temperature or reducing the pressure.Related ProductsJLOX-500 products are mainly used in PSA industrial oxygen production and medical center oxygen supply systems. Cryogenic Air Separation JLPM https://www.jalonzeolite.in/cryogenic-air-separation-jlpm.htm https://www.jalonzeolite.in/cryogenic-air-separation-jlpm.htm Sat, 24 Apr 2021 00:00:00 +0530 JLPM molecular sieve is a synthetic crystalline aluminosilicate with well developed three-dimensional pore structure and strong polarity. It is widely used Cryogenic Air Separation for industry gases dehydration , water and carbon dioxide removal in PPU of ASU, desulfuration and decarburization of natural gas and hydrocarbons gas.by lowering operating costs and energy consumption. Advantages Comparing traditional molecular sieve 13X, JLPM product has following advantages • Higher adsorption capacity to different impurity gases • Faster adsorption rate • Extend adsorption cycle from 1.5 to 2 times • Dramatic energy saving Storage The product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air. Regeneration Molecular sieve JLPM can be regenerated by increasing temperature or reducing the pressure. Zeolite PSA JLOX-500 https://www.jalonzeolite.in/zeolite-psa-jlox-500.htm https://www.jalonzeolite.in/zeolite-psa-jlox-500.htm Sat, 24 Apr 2021 00:00:00 +0530 13X PSA O2 HP IN JALON Equivalent JLOX-500 molecular sieve for oxygen generator,it is high-efficiency oxygen molecular sieve a new type of X-type molecular sieve, which is mainly used in pressure swing adsorption oxygen production process with pressure adsorption and atmospheric analysis. It has a high nitrogen adsorption capacity and an excellent nitrogen and oxygen separation coefficient.   JLOX-500 products are mainly used in PSA industrial oxygen production and medical center oxygen supply systems. The JLOX-501 product is designed for PSA portable medical oxygen concentrator 1-5L/Min,oxygen purity can up to 93%±3%. Advantages JLOX-500 series high-efficiency oxygen generation molecular sieves are mainly used in pressure swing adsorption (PSA) oxygen generation devices. It has the advantages of high purity of oxygen production, high yield of oxygen production, fast adsorption rate and long service life. Storage The product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air. Regeneration Molecular sieve JLOX-500 series can be regenerated by increasing temperature or reducing the pressure. Related Products JLOX-100 series of high-efficiency oxygen generation molecular sieve is a lithium X-type aluminosilicate crystal.JLOX-101 is designed for PSA portable medical oxygen concentrator 1-5L/Min, JLOX-103 is designed for VPSA industrial oxygen generator, which oxygen flow rate is above 300Nm³/h,oxygen purity can up to 93%±3%. Air Separation JLOX-300 https://www.jalonzeolite.in/air-separation-jlox-300.htm https://www.jalonzeolite.in/air-separation-jlox-300.htm Sat, 24 Apr 2021 00:00:00 +0530 Molecular sieve JLOX-300 is used in cryogenic air separation pre-purification unit. JLOX-300 can fully exert and show its adsorption performance under low partial pressure. Advantage Under the condition of 2.7-2.8mmHg, compared with 13X molecular sieve, the adsorption capacity is increased by 53.6%. According to the reversible principle of molecular sieve adsorbent adsorption and desorption, the desorption efficiency of the purifier can be greatly improved, and the adsorption cycle (up to 7 hours) can be significantly extended. That is, the purifier can be made higher without changing the purifier device. The air handling capacity of the air purifier reduces the investment capital of the purifier and has higher economic benefits. Storage The product should be stored in original pack or air-proof package in cool and dry conditions should not be left exposed to open air. Regeneration Molecular sieve JLOX-300 series can be regenerated by increasing temperature or reducing the pressure. 3A Zeolite Powder https://www.jalonzeolite.in/3a-zeolite-powder.htm https://www.jalonzeolite.in/3a-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Zeolite powder 3A is an alkali metal aluminosilicate, and it is the potassium form of the type A crystal structure. Zeolite powder 3A can adsorb molecues with critical diameter less than 3 angstroms(0.3 nm). 4A Zeolite Powder https://www.jalonzeolite.in/4a-zeolite-powder.htm https://www.jalonzeolite.in/4a-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Zeolite powder 4A is an alkali metal aluminosilicate, and it is the sodium form of the type A crystal structure. Zeolite powder 4A can adsorb molecues with critical diameter less than 4 angstroms(0.4 nm). 5A Zeolite Powder https://www.jalonzeolite.in/5a-zeolite-powder.htm https://www.jalonzeolite.in/5a-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Zeolite powder 5A is an alkali metal aluminosilicate, calcium form of the type A crystal structure. Zeolite powder 5A can adsorb molecues with critical diameter less than 5 angstroms(0.5 nm). 13X Zeolite Powder https://www.jalonzeolite.in/13x-zeolite-powder.htm https://www.jalonzeolite.in/13x-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Zeolite powder 13X is an alkali metal aluminosilicate; it is the sodium form of the type X crystal structure. Zeolite powder 13X can adsorb molecues with critical diameter less than 10 angstroms(1 nm). CaX Zeolite Powder https://www.jalonzeolite.in/cax-zeolite-powder.htm https://www.jalonzeolite.in/cax-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Specialized synthetic zeolite powder produced by Jianlong including MSX(medium-silicon X), LSX(low-silicon X), NaLSX(Sodium-exchanged forms of LSX type zeolites), LiLSX(lithium-exchanged forms of LSX type zeolites) and CaLSX(calcium-exchanged forms of LSX type zeolites)etc. LiLSX Zeolite Powder https://www.jalonzeolite.in/lilsx-zeolite-powder.htm https://www.jalonzeolite.in/lilsx-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 Specialized synthetic zeolite powder produced by JALON including MSX(medium-silicon X), LSX(low-silicon X), NaLSX(Sodium-exchanged forms of LSX type zeolites), LiLSX(lithium-exchanged forms of LSX type zeolites) and CaLSX(calcium-exchanged forms of LSX type zeolites)etc. 3A Activated Zeolite Powder https://www.jalonzeolite.in/3a-activated-zeolite-powder.htm https://www.jalonzeolite.in/3a-activated-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 JLH-03-B are synthetic zeolite of the type A crystal structure, in kalium form having after dehydration an effective pore opening of 3 Angstroms.It can be used as adsorbent or desiccant directly in polymer systems; it deals with moisture problems without causing undue problems with shelf-life viscosity, avoid the formation of bubbles, and prolong the service life of the material.Polyurethane IndustryMoisture is one of the primary challenges in the polyurethane industry since the material readily absorbs water from the air and create gaseous carbon with the isocyanate constituent. The Carbon Dioxide gases can create undesirable effects such as air bubbles on polyurethane coating, which significantly decreases the shelf life of the product.SpecificationMolecular sieve powder is well compatible with commonly used polyols, polyethers and isocyanates. They are easily dispersible and especially stabilized to ensure sufficiently long hardening times.In certain paint and coating systems, moisture introduced into the formulation via the raw materials (solvents, pigments, extenders) causes undesirable side effects.In metallic and zinc-rich paints (such as marine paints for tank ships and yachts), water reacts with the very active metallic pigments such as zinc or aluminum, forming hydrogen. This leads to overpressure in the cans, and in extreme cases to leakage.Zn+H2O→Zn(OH)2+H2Al+H2O→Al(OH)3+H2In metallic and zinc-rich paints, the adverse effect can be avoided by the use of JLH-03-B, JLH-04. It adsorbs the moisture rapidly, with the result that the above reactions can be suppressed, thus reducing returns and storage problems. 4A Activated Zeolite Powder https://www.jalonzeolite.in/4a-activated-zeolite-powder.htm https://www.jalonzeolite.in/4a-activated-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 JLH-04 are synthetic zeolite of the type A crystal structure, in sodium form having after dehydration an effective pore opening of 4 Angstroms.It can also adsorb molecules such as nitrogen and oxygen from the air and used as a water adsorbent in paints formulation, pastes, adhesives, chemical reaction where water is created and has to be eliminated to increase efficiency of a molecular synthesis.   Polyurethane Industry Moisture is one of the primary challenges in the polyurethane industry since the material readily absorbs water from the air and create gaseous carbon with the isocyanate constituent. The Carbon Dioxide gases can create undesirable effects such as air bubbles on polyurethane coating, which significantly decreases the shelf life of the product.   Specification JLH-04 is largely used to remove moisture from polyurethane polymer systems; it deals with moisture problems without causing undue problems with shelf-life viscosity etc. Other types are used as additives for selective adsorption in defined polymer system or coating systems 5A Activated Zeolite Powder https://www.jalonzeolite.in/5a-activated-zeolite-powder.htm https://www.jalonzeolite.in/5a-activated-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 JLH-05-A are synthetic zeolite of the type A crystal structure, in calcium form having after dehydration an effective pore opening of 5 Angstroms. It can adsorb C3-C4 normal alkanes, chloroethane, bromoethane, butanol, etc. It can be used in the separation of n-isomeric hydrocarbons, and the co-adsorption of water and carbon dioxide 13X Activated Zeolite Powder https://www.jalonzeolite.in/13x-activated-zeolite-powder.htm https://www.jalonzeolite.in/13x-activated-zeolite-powder.htm Sat, 24 Apr 2021 00:00:00 +0530 JLH-013 are synthetic zeolite of the type X crystal structure, in sodium form having after dehydration an effective pore opening of 10 Angstroms.It can achieve deep dehydration, adsorb trace moisture, avoid the chemical reaction between water and some active ingredients, and can adsorb acid gases such as hydrogen sulfate and carbon dioxide released in the system, improve the physical and chemical properties of products or materials. Activated Alumina https://www.jalonzeolite.in/activated-alumina.htm https://www.jalonzeolite.in/activated-alumina.htm Sat, 24 Apr 2021 00:00:00 +0530 Activated alumina is mainly used for dehydration of gaseous and liquid in petrochemical ,electronic ,metallurgy industry ,for instance,air ,oxygen ,nitrogen , ethylene and propylene etc.Activated alumina is an excellent desiccant for drying a wide variety of liquids and gases. Our activated alumina has been developed with high attrition resistance and crush strength, It has larger water adsorption capacity comparing to molecular sieve at high relative humidity and providing long service life with performance at or below dew point specifications. Activated alumina is widely used in large and small dryers. It is appropriate for use in dehydrating gases in both thermally regenerative and pressure swing adsorption (PSA) process.   Major ApplicationsCryogenic Air Separation Cryogenic air separation plays a key role in producing oxygen, nitrogen, and argon by separating contaminants such as carbon dioxide and water from a gas stream. Our rapid absorption solution can satisfy the wide needs of air separation across numerous industrial production. Air Drying As a process, air drying takes away the moisture from the air, keeping the machinery and equipment running uninterrupted. This is an energy-efficient and cost-effective method of maintaining moisture levels within the area, which can help reduce production and maintenance costs. Activated Alumina JLAZ-1 https://www.jalonzeolite.in/activated-alumina-jlaz-1.htm https://www.jalonzeolite.in/activated-alumina-jlaz-1.htm Sat, 24 Apr 2021 00:00:00 +0530 JLAZ-1 is a high performance activated alumina that is used for air drying Desiccant dryer. It has much higher advantage than activated alumina, but similar regeneration temperature. The product has been well received and used in air dryer and gas dehydration, etc.   Air Drying As a process, air drying takes away the moisture from the air, keeping the machinery and equipment running uninterrupted. This is an energy-efficient and cost-effective method of maintaining moisture levels within the area, which can help reduce production and maintenance costs.